Filter
Top Products
E-6
Note:
If the track is skipped during playback, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
To play back CD-R/RW.
You can choose up to 32 selections for playback in the
order you like.
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit,
press again the button on the remote control. The
“MEMORY” indicator will disappear and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the
“MEMORY” indicator will be displayed. Follow steps 1 - 4
to add tracks. The new tracks will be stored after the last
track of the previous programme.
Listening to a CD or MP3/WMA disc (continued)
■ Procedure to playback CD or MP3/WMA
disc with folder mode off
1
Select the CD function, and load a CD or an MP3/WMA
disc. After disc is loaded, disc info will be displayed.
2 Select desired file to be played back by pressing the
or button.
3 Press the / button. Playback will start.
● Title, Artist and Album name are displayed if they are
recorded on the disc.
● Display content can be changed by pressing the
(CLEAR)/DISP button.
■ Procedure to playback MP3/WMA disc with
folder mode on
1
Select the CD function, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed. Press the
FOLDER button.
2 Press the PRESET ( or ) button, to select desired
playback folder. (Folder mode on)
3 Select desired file to be played back by pressing the
or button.
4 Press the / button. Playback will start.
● Folder name, File name, Title, Artist and Album
name are displayed if they are recorded on the disc.
● Press the PRESET ( or ) button, and the folder
can be selected even though it is in playback mode.
It will continue playback mode in the 1st track of the
selected folder.
● Display content can be changed by pressing the
(CLEAR)/DISP button.
TOTAL
indicator
Total number of files
Total files in Folder 3
Folder number
Folder name display
Counter display
File name display
Title display
Album display
Artist display
■ Programmed play (CD or MP3/WMA with
folder mode off)
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the or button to select the desired track.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the (CLEAR)/DISP button.
5 Press the / button to start playback.
6 Press the button. The total number in memory will
appear.
Selected track number