Filter
Top Products
E-8
The following functions are the same as CD opera-
tion:
Direct search
Repeat play
Random play
Playback
Programmed play
Note:
If the USB memory device is not connected, “no” will be
shown on the display.
To remove USB memory device■
Press the button to stop playback.
Press the
button again and wait until display “Un”
stops blinking.
Disconnect the USB memory device from the USB
terminal.
Notes:
SHARP will not be held liable for the loss of data while
the USB memory device is connected to the audio
system.
This USB memory’s format supports FAT 16 or FAT
32.
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
●
●
●
●
●
1
2
3
●
●
●
●
Note:
This product is not compatible with MTP and AAC file
systems.
Listening to USB mass storage device/MP3 player
To play back USB/MP3 player■
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
Select desired file to be played back by pressing the
or button.
Press the
button. Playback will start.
During playback, press DISPLAY button to display
the folder, then track number. It will appear for
about 2 seconds.
Note:
To pause playback:
Press the
button.
1
2
3
●