Filter
Top Products
E-10
Press and hold the CLEAR button until “CLr”
appears.
1
To erase entire preset memory■
Press the PRESET/FOLDER ( or ) button to select the
desired station.
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
Perform steps 2 - 3 in “Tuning”.
Press the MEMORY button.
Within 5 seconds, press the PRESET/FOLDER ( or
) button to select the preset channel number. Store
the stations in memory, in order, starting with preset
channel 1.
Press the MEMORY button to store that station in
memory. If the “MEM” and preset number indicators
disappear before the station is memorised, repeat the
operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
Note:
During listening to the radio, press DISPLAY button to
display PRESET number.
The backup function protects the memorised stations
for a few hours should there be a power failure or the
AC power lead become disconnected.
1
2
3
4
5
●
●
To recall a preset station■
To preset a station■
Listening to the radio (continued)
The stations saved in the memory can be scanned auto-
matically. (Preset memory scan)
Press and hold the PRESET/FOLDER ( or ) button.
The preset number will flash and the programmed
stations will be tuned in sequentially, for 5 seconds
each.
Press the PRESET/FOLDER ( or ) button again
when the desired station is located.
1
2
To scan the preset stations■