Sharp XL-UH06H Stereo System User Manual


 
E-6
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until RDM indicator appears.
To cancel random play:
Press the PLAY MODE button until RDM indicator
disappears.
Notes:
Selecting the repeat function will cancel the random
playback.
Playback will stop after all the tracks is played
randomly.
If you press the
or button during random
play, you can move to the track selected next by the
random operation.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Procedure to play back MP3/WMA disc
with folder mode off
Select the CD function, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed.
Select desired file to be played back by pressing the
or button.
Press the
button. Playback will start.
During playback, press DISPLAY button to display the
folder, then track number. It will appear for about 2
seconds.
Note:
If the track is skipped during playback, it means
“Copyright protected WMA file” or “Not supported
playback file” is selected.
Procedure to play back MP3/WMA disc
with folder mode on
To play back CD-R/RW.
Select the CD function, and load an MP3/WMA disc.
Press the FOLDER button and the disc info will be
displayed. (Folder mode on.)
Total number of folders
Press the PRESET/FOLDER ( or ) button to select
desired playback folder. Folder number and total tracks in
the chosen folder will be displayed interchangeably.
1
2
3
1
2
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to
select the desired track.
The Numeric buttons allow you to select up to number
9.
When selecting number 10 or higher, use the “10+”
button.
A.
For example, to
choose 13
Press the “10+”
button once.
Press the “1” button.
Press the “3” button.
1
2
3
Selected track number
B. For example, to choose 130
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
1
2
3
4
Notes:
A track number higher than the number of tracks on
the disc cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the
button on main unit or remote control.
Listening to a CD or MP3/WMA disc (continued)
Direct track search
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until
indicator appears. Press the button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until
indicator appears. Press the button.
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on
page 7 and then press the PLAY MODE button until
indicator appears.
To cancel repeat play:
Press the PLAY MODE button again until
or
indicator disappears.
Random play