Filter
Top Products
E-7
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
Note:
To pause playback:
Press the / button.
The following functions are the same as CD operation:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Note:
If USB memory device is not connected, “NO MEDIA” will
be shown on the display.
Notes:
●
SHARP will not be held liable for the loss of data whilst the
USB memory device is connected to the audio system.
●
Files compressed in MP3 and/or WMA format can be played
back when connected to the USB terminal.
●
This USB memory’s format supports FAT 16 or FAT 32.
●
SHARP cannot guarantee that all USB memory devices will
work on this audio system.
●
USB cable is not recommended for use in this audio system
to connect to USB memory device. Use of the USB cable will
affect the performance of this audio system.
●
This USB memory cannot be operated via USB hub.
●
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
●
External HDD-storage cannot be played back via USB
terminal.
●
If the data inside the USB memory is large, it may take longer
time for the data to be read.
Listening to a CD or MP3/WMA disc (continued)
2 Press the PRESET ( or ) button to select the
desired folder, a then press the or button on the
remote control to select the desired track.
3 Press the MEMORY button to save the track number.
Selected track number
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed.
5 Press the / button to start playback.
6 During programmed playback, press the button to
stop programmed playback.
Listening to USB mass storage device/MP3 player
■ To play back USB/MP3 player
1
Press the FUNCTION button repeatedly to select USB
function. Connect the USB memory device that has
MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Select desired file to be played back by pressing the
or button.
3 Press the / button. Playback will start.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
(CLEAR)/DISP button.
XL-E12
■ To remove USB memory device
1
Press the button to stop playback.
2 Press the button again and wait until “OK” is
displayed.
3 Disconnect USB memory device from the USB terminal.