Sharp XL-E12H Stereo System User Manual


 
E-5
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected
disc.
The Direct Search buttons allow you to select up to
number 9.
When selecting number 10 or higher, use the “10+”
button.
Notes:
A track number higher than the number of tracks on the
disc cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the button on the main unit or remote control.
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “REP ONE”
appears. Indicator 1 will light up. Press the / button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “REP ALL”
appears. Indicator will light up. Press the / button.
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page
6 and then press the PLAY MODE button until “REP ALL”
appears. Indicator will light up. Press the / button.
To cancel repeat play:
Press the PLAY MODE button again until “NORMAL”
disappears. Indicator “ 1” or “ ” disappears.
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RDM ON” appears and “RDM” icon light up.
Press the / button.
To cancel random play:
Press and hold down the PLAY MODE button until “RDM
ON” appears . “RDM” icon will disappear.
Notes:
During random playback, repeat function is not possible.
Playback will stop after all the tracks is played randomly.
If you press the button during random play, you can
move to the track selected next by the random operation.
On the other hand, the button does not allow you to
move to the previous track.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
Note:
If the track is skipped during playback, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
Listening to a CD or MP3/WMA disc (continued)
Various disc functions
Function Main
unit
Remote
control
Operation
Play Press in the stop mode.
Stop Press in the playback
mode.
Pause Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Track up/
down
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
Direct track search
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
Selected track number
Repeat play
Random play
Procedure to playback CD or MP3/WMA
disc with folder mode off
1
Select the CD function, and load a CD or an MP3/WMA
disc. After disc is loaded, disc info will be displayed.
2
Select desired file to be played back by pressing the
or button.
3
Press the / button. Playback will start.
File name, Title, Artist and Album name are
displayed if they are recorded on the disc.
Display content can be changed by pressing the
(CLEAR)/DISP button.