Filter
Top Products
04/1/28 XL-DH10N 20H_EN
11
9
8
7
6
5
4
3
2
1
9
Advanced CD or MP3/WMA disc playback (continued)
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RANDOM” icon light up. Press the /
button.
To cancel random play:
Press and hold the PLAY MODE button. “RANDOM” icon
will disappear.
Notes:
● During random playback, repeat function is not
possible.
● Playback will stop after all the tracks is played
randomly.
● If you press the button during random play, you can
move to the track selected next by the random opera-
tion. On the other hand, the button does not allow
you to move to the previous track.
● The beginning of the track being played will be located.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
You can choose up to 32 selections for playback in the
order you like.
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit,
press the button on the remote control twice. The
“MEMORY” indicator will disappear and all the
programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the
“MEMORY” indicator will be displayed. Press the
MEMORY button repeatedly until last track appears. Then
follow steps 2 - 4 to add tracks. The new tracks will be
stored after the last track of the previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode,
press the MEMORY button repeatedly.
To clear the programmed selections:
During stop mode, press the MEMORY button repeatedly
to select the unwanted track. Press the CLEAR button to
delete it.
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
■ Random play
■ Programmed play
1
Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the or buttons on the remote control to
select the desired track.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the CLEAR button.
Selected track number
5 Press the / button to start playback.
6 Press the CD button. The total number in memory will
appear.