Sharp SD-EX200 Stereo System User Manual


 
29
SD-EX200
03/3/14
SD-EX200_sec.fm
TINSZ0523AWZZ
2
3
4
5
6
7
8
1
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Amplifier
CD player
Tuner
Speaker
Power source AC 120 V, 60 Hz
Power consumption 76 W
Dimensions Width: 15"(380 mm)
Height: 7-7/8"(200 mm)
Depth: 4-3/4"(120 mm)
Weight 7.5 lbs. (3.4 kg)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Digital output (optical)
Input terminals Auxiliary input: 500 mV/47 k ohms
Amplification system 64fs 1-bit switching (Remarks: fs = 44.1 kHz)
Power output 100 watts minimum RMS per channel into 4 ohms from
40 Hz to 20 kHz, 2 % total harmonic distortion
A/D noise shaping 7th-order (delta - sigma) modulation
Type 1-disc vertical type compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 24-bit/96 k D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 101 dB (1 kHz)
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1.720 kHz
Type 2-way type speaker system
2" (5 cm) Tweeter
5-7/8" (15 cm) Woofer
Maximum input power 200 W
Rated input power 100 W
Impedance 4 ohms
Dimensions Width: 7-1/2" (190 mm)
Height: 11-7/16" (290 mm)
Depth: 9-5/16" (235 mm)
Weight 8.4 lbs. (3.8 kg)/each