Filter
Top Products
24
SD-EX200
03/3/14
SD-EX200_sec.fm
TINSZ0523AWZZ
Advanced Features
- Timer and sleep operation -
Timer and sleep operation (continued)
Sleep operation
The radio and CD can be turned off automatically.
To confirm the remaining sleep time:
z The remaining sleep time is displayed for about 10 seconds.
z You can change the remaining sleep time while it is displayed by pressing the
ENTER button (steps 5 - 6).
To cancel the sleep operation:
The sleep timer is canceled when the unit enters the power stand-by mode.
To cancel only the sleep timer without setting the unit to the power stand-by mode,
proceed as follows.
To use timer and sleep operation together
Example: You can fall asleep to the radio and wake up with the sound from a CD.
1
Play back the desired sound source.
2
Press the TIMER button.
3
Within 10 seconds, press the
CURSOR ( or ) button to select
"SLEEP".
4
Within 10 seconds, press the EN-
TER button.
5
Press the CURSOR ( or ) but-
ton to specify the sleep time.
(Maximum: 2 hours - Minimum: 1
minute)
6
Press the ENTER button.
7
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
1Press the TIMER button while the sleep timer is set.
2Within 10 seconds, press the CURSOR (
or ) button to select "SLEEP".
Remaining sleep time
1Press the TIMER button while the sleep timer is set.
2Within 10 seconds, press the CURSOR (
or ) button to select "SLEEPOFF".
3Within 10 seconds, press the ENTER but-
ton.
1Set the sleep time (steps 1 - 6, page 24).
2Set the timer playback (steps 1 - 12, pages
22 - 23).
1.
Sleep timer setting
2.
Timer playback setting
Timer playback
start time
1 minute - 2 hours
Desired time
Sleep operation will
automatically stop.
End time