Sharp CDPC3500 Stereo System User Manual


 
<P=004>
COMPACT DISC OPERATION
CD playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the CD(s) on the disc tray, label side up.
CDs can be placed on any open position on the disc tray.
Be sure to place 3" (8 cm) CD(s) in the middle of the disc
trays.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
5 When loading a third disc, press the DISC SKIP button to turn
the disc tray, then place the CD in the open position.
6 Press the OPEN/CLOSE button to close the disc tray.
The total number of tracks and the total playing time for one
disc will be displayed. At this time, the disc number indicator
is flashing.
The music schedule will be displayed only for the number of
tracks on the disc.
If the CD contains more than 15 tracks, " " will appear.
7 Press the desired disc number button ( 1 - 3).
8 Press the ( ) button.
Playback will begin from track 1 on the disc you have selected
to play.
After the disc finishes playing, the next disc will automatically
play.
When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will be played.
When the last track on the third disc has finished playing, the
unit will stop automatically.
To interrupt playback:
Press the CD button on the remote control.
" " will appear.
Press the button to resume playback from the same
point.
To stop playback:
Press the (CD ) button.
To remove the CDs:
While in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press
the DISC SKIP button to rotate the disc tray and remove the
remaining disc.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
CD
CD
4
5
1
2
7
3,6
5
8
2
1
5
8
5" (12 cm)
3" (8 cm)
Music schedule
More tracks indicator
Total number of tracks Total playing time
CD-PC3500(SEC) TINSE0281AWZZ
13