Filter
Top Products
21
CD-MPS66
CD-MPS600
CD or MP3 disc Playback
! Programmed play
You can choose up to 32 selections for playback in the order you
like.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or button.
Notes:
" When a disc with programmed tracks is ejected, the program is
automatically canceled.
" Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
" During the program operation, random play is not possible.
"
During programmed play, the DIRECT PLAY button will not work.
1 While in the stop mode, press the
MEMORY/SET (MEMORY) button
to enter the programming save
mode.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
Selected track number
You can also select a track by pressing the or button.
4 Press the MEMORY/SET (MEMO-
RY) button to save the track
number.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the button.
The total number of memory will ap-
pear.
7 Press the / button to start playback.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control while the "MEMORY" indicator is
flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.