Filter
Top Products
31
CD-BA250(U)3.fm00/12/4
References
- Specifications -
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
„
General
„
Amplifier
„
CD player
„
Tu ne r
„
Cassette deck
„
Speaker
Power source
AC 120 V, 60 Hz
Power consumption
128 W
Dimensions
Width: 10-5/8" (270 mm)
Height: 13" (330 mm)
Depth: 13-7/16" (340 mm)
Weight
13.8 lbs. (6.3 kg)
Output power
75 watts minimum RMS per channel into 6 ohms from
60 Hz to 20 kHz, 10% total harmonic distortion
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 kohms
Type
3-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Frequency response
50 - 14,000 Hz (Normal tape)
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter
0.3 % (WRMS)
Type
2-way type speaker system
2" (5 cm) Tweeter
3-15/16" (10 cm) Woofer
Maximum input power
150 W
Rated input power
75 W
Impedance
6 ohms
Dimensions
Width: 8-11/16" (220 mm)
Height: 13" (330 mm)
Depth: 8-9/16" (217 mm)
Weight
6.6 lbs. (3.0 kg)/each