Sharp MD-MX10H Stereo System User Manual


 
8
15
2 "AA" size batteries
(UM/SUM-3, R6, HP-7
or similar)
15
Remote
sensor
0.2 m - 6 m
(8" - 20')
(Continued)
Remote control To change the brightness of the display
When bright
Lights up
When dark
Goes out
DIMMER
1 Press the ON/STAND-BY button to turn the power on.
2 Press the DIMMER button.
The display will become dimmer and the light around the
VOLUME control will go out.
To return to the original brightness:
Press the DIMMER button again.
When inserting or removing the batteries, push them
toward the battery terminal.
Installing the batteries incorrectly may cause the unit
to malfunction.
Precautions for battery use:
Insert the batteries according to the direction indicated in
the battery compartment.
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit will not
be used for long periods of time.
This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Notes concerning use:
Replace the batteries if the operating distance is reduced
or if the operation becomes erratic.
Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.
Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direc-
tion of the unit.
Keep the remote control away from moisture, excessive
heat, shock, and vibrations.
ÏÏ
ÏÏ
Ï