Filter
Top Products
7
(Continued)
To AC INPUT
AC 230 V, 50 Hz
To an AC socket
■ Placing the system
■ Connecting the AC power lead
Connect the AC power lead to the AC INPUT socket, then
connect its plug to an AC socket.
Notes:
● Unplug the AC power lead from the AC socket if the unit
will not be in use for a prolonged period of time.
● Never use a power lead other than the one supplied. Use
of a power lead other than the one supplied may cause an
electric shock or fire.
■ Demo mode
Be sure to keep space between the units for ventilation.
Keep the top and the back of this unit at least 10 cm (4")
away from the wall.
Note:
● Do not place the system or speakers near a television set
as the magnetic fields produced may cause irregular co-
lours to be displayed.
DISPLAY
(DEMO)
When the AC power lead is first connected, the unit will
enter the demonstration mode and the words will scroll
across the display continuously.
To cancel the demonstration mode:
When in the demonstration mode, press the DISPLAY (DEMO)
button.
● The demonstration mode will be cancelled and the unit
will be in the low power consumption mode.
Note:
● When the unit is in the low power consumption mode, the
display will disappear.
10 cm (4")
10 cm (4")
10 cm (4") 10 cm (4")