Filter
Top Products
53
IM-DR420H
1
2
3
4
5
6
03/7/21 IM-DR420H_UK_6.fmIM-DR420H(E) TINSE0554AWZZ
References
-Error Messages-
A number or symbol appears in (*) position.
ERROR
MESSAGES
MEANING
NO SIGNAL
"
Poor connection of the digital cable.
"
No output signal comes out from the
connected unit.
(Use the AC power for the connected
unit.)
"
The input signal has improper sam-
pling frequency.
PLAY MD
"
You tried to record on a playback-
only disc.
POWER?
"
AC adaptor other than specified.
PROTECTED
"
The write protection tab of a MiniDisc
is set to the protected position.
SORRY
"
Since a track number is currently be-
ing located or updated, the unit can-
not accept your command.
(Wait a while and try the operation
again.)
ERROR
MESSAGES
MEANING
TEMP OVER
"
The temperature is too high.
(Turn off the power, and wait a while.)
TOC FORM
(**)
"
There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
TOC FULL
"
There is no space left for recording
character information (track names,
disc names, etc.).
Tr. Protect
"
The track has been protected from
being erased.
(Edit the track with the device on which
it was recorded.)
? DISC
"
A disc which contains data other
than music was played.
(A disc which contains nonmusic data
cannot be played.)
"
There is an error in the signal record-
ed on the disc.
8