Sharp IM-DR420H CD Player User Manual


 
03/7/21 IM-DR420H_UK_2.fm
12
IM-DR420H
IM-DR420H(E) TINSE0554AWZZ
Power Source
-Using with the AC Adaptor/Alkaline Battery-
Using with the AC Adaptor
Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 3V socket.
Caution:
"
Insert the plugs firmly.
"
When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.
Notes:
"
If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electricity
resumes.
"
This unit can be used with the AC adaptor when the
rechargeable or an alkaline battery is in the unit.
Using with the Alkaline Battery
Use one commercially available alkaline battery (LR6,
"AA" size).
1
Push and slide the battery cover.
2
Open the battery cover.
3
Insert an alkaline battery according to the
direction indicated in the battery compart-
ment.
4
Close the battery cover.
Notes:
"
Do not replace the battery during operation.
"
Do not use a nickel-cadmium battery.
"
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due
to battery leakage.
"
Installing the battery incorrectly may cause the unit to
malfunction.
To the DC IN 3V socket
AC 110 - 240V,
50/60 Hz
To the wall socket
When inserting or removing the battery, push it to-
wards the battery terminal.
3
1
2