Filter
Top Products
29
IM-DR420H
1
2
3
4
5
6
03/7/21 IM-DR420H_UK_4.fmIM-DR420H(E) TINSE0554AWZZ
Useful Features
-Recording from a Microphone-
Recording from a Microphone
1
Connect a stereo microphone to the MIC IN
socket.
2
Insert a recordable MiniDisc (page 13).
3
Press the REC button.
4
Press the MENU/ENTER button.
To the MIC IN
socket
( )
PLUG IN
POWER
Stereo
microphone
(commercially
available)
5
Press the or button repeatedly to se-
lect "Mic Level".
6
Press the MENU/ENTER button.
7
Press the or button repeatedly to se-
lect "Auto-Hi", "Auto-Lo" or "MANUAL".
"
When "Auto-Hi" or "Auto-Lo" is selected, the re-
cording level is automatically adjusted according to
changes in sound volume. Normally select "Auto-
Hi". When the recording level frequently reaches
"OVER", switch to "Auto-Lo" to lower the level. Set
the maximum level between "-4 dB" and "0 dB".
"
The automatic level adjustment may be delayed
by a few seconds where source sounds show
sudden and rapid changes (especially in meet-
ings and conversations). In this case adjust the
recording level manually (see page 30).
8
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
9
Select the recording mode (steps 1 - 5,
page 24).
10
Press the button.
Recording will start.
5