Filter
Top Products
HT-SB60
2 – 1
CHAPTER 2. ADJUSTMENTS
[1] Test Mode
1. Enter the Test Mode version display
While pressing down ON/STANDBY and SOURCE button, ON AC supply.
Version will be displayed as below :-
SB60 XXXX --> DHHHHHHH --> TX Ver : XXXX --> RX Ver : XXXX -->
Press SOUND MODE key at main unit to toggle between display.
After enter Test Mode version display, Press VOL UP / DOWN button.
Select “KEY TEST”. Press SOUND MODE button to execute.
While in Test Mode function, Press ON/STANDBY button to exit.
1. TIMER LED will light ON
2. LCD display will light on. If press button as below :
SB60 = Model name, SB60
XXXX = version no
D = Destination
HHHHHHH = HDMI Firm Ware Version
TX Ver : XXXX = Wireless module Firmware version (sound bar wireless module)
RX Ver : XXXX = Wireless module Firmware version (subwoofer wireless module)
2. Enter Key and Display Test Mode
3. Exit the Test Mode
4. Error Code Description.
Key
VOL UP KEY 01
VOL DOWN KEY 02
SOUND MODE KEY 03
PAIRING KEY 04
SOURCE KEY 05
Display
Display
Explanation
Solution
E1
Communication error between Micom and CS8416 / CS5346
> Unplug AC cord and turn power ON again
E2
Communication error between Micom and CS4953xx
> Check line connected between
E3
Communication error between Micom and TAS5508B
E4
Communication error between Micom and HDMI