Filter
Top Products
E-15
Bluetooth
one touch connection via NFC (continued)
NFC connection for audio playback
Check that:
Your device (smartphone / tablet) has an NFC function.
NFC function on your device is turned on.
Screen lock function of the device is off.
This unit is not in Eco mode.
1 Touch your device to the NFC detection area on the
subwoofer or supplied NFC tag.
NFC detection area
NFC tag
Or
2 A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
The ‘connected’ message appears when the connec-
tion is complete.
3 Playback will start automatically. Otherwise, press
play (on remote control or source device).
Sound will be heard from the speakers of this unit via
audio streaming.
Your device must be within 10 meters from the sound
bar.
Bluetooth
operation buttons (remote control only)
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Notes:
To disconnect, simply touch your device to the NFC
detection area on the subwoofer or NFC tag again.
To listen to audio via Bluetooth connectivity without
NFC tag - refer “Pairing with other
Bluetooth
source
devices” on page 16.
It takes about 6-8 seconds for a Bluetooth enabled device
(eg. smartphone) to establish Bluetooth connection with
this unit via NFC or manual connection.
Listening to
Bluetooth
enabled devices
Bluetooth
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System: Bluetooth Specifi cation version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profi le : A2DP (Advanced Audio Distribution Profi le)
and AVRCP (Audio/Video Remote Control Profi le)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone whilst transmitting the sound using a Bluetooth
connection.
Pairing
Bluetooth
devices
Bluetooth devices need to be initially paired fi rst before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
Pairing is made with more than 8 devices. Pairing can
only be made one device at a time. This unit can be
paired to a maximum of 8 devices. If subsequent device
is paired, the oldest device paired, will be deleted and
replaced with the new one.
This unit is reset. All pairing information is deleted when
unit is reset.
Pairing information is deleted whilst re-pairing, etc.