08/1/15 CD-G14000_EN.fm
38
Advanced Features
TINSEA128AWZZ
CD-G14000
Timer and sleep operation (Remote Control only) (continued)
Note:
Checking the timer setting in the timer stand-by mode:
Canceling the timer setting in the timer stand-by mode:
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
12 When the preset time is reached, playback or recording
will start.
The volume will increase gradually until it reaches the preset
volume.
13 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is canceled. Cancel the
daily timer when it is not used.
When performing timer playback or recording using another unit
connected to the AUDIO IN jacks, select “AUDIO IN” in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the or button to select
“ONCE CALL” or “DAILY CALL”, and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the or button to select
“ONCE OFF” or “DAILY OFF”, and press the MEMORY button.
Timer will be canceled (the setting will not be canceled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the or button to select
“ONCE ON” or “DAILY ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.