Sharp DK227N Stereo System User Manual


 
03/12/17 XL-DK227N.fm
29
XL-DK227N
Advanced Features
4 Within 10 seconds, press the or button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button.
5 Press the or button to adjust the hour and
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
6 Press the or button to adjust the minutes and
then press the MEMORY button.
7 Set the time to finish as in steps 5 and 6 above.
8 Switch input with the or button, and then
press the MEMORY button.
To select the timer playback source: CD, TUNER, iPod or
AUDIO IN.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY
button.
If a station has not been programmed, “NO PRESET” will be
displayed and timer setting will be canceled.
9 Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
10 Press the ON/STAND-BY button to enter the power stand-
by mode.
The “TIMER” indicator lights up and the unit is ready for timer
playback.
11 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the preset
volume.
12 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is canceled. Cancel the
daily timer when it is not in use.