Sharp DK227N Stereo System User Manual


 
03/12/17 XL-DK227N.fm
14
XL-DK227N
Basic Operation
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Illumination light control
When the unit’s power is turned on, the ring around the volume
control lights up. To turn on/off the light, hold down the CLEAR/
DIMMER button on the remote control for more than 2 seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned counterclockwise, the volume will
decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasizes the bass frequencies, and “X-BASS” will
appear. To cancel the extra
bass mode, press the X-BASS button
on the remote control
.
Equalizer
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Docking Station
MICRO COMPONENT SYSTEM
30 MAXIMUM0
.....
ROCK For rock music.
FLAT No equalization.
CLASSIC For classical music.
POPS For pop music.
JAZZ For
j
azz.
VOCAL Vocals are enhanced.