Filter
Top Products
E-4
System connections (continued)
Make sure to unplug the AC power cord before making any connections.
TV
Wire
AC outlet (AC 120 V ~ 60 Hz)
FM antenna
External FM
antenna for
better reception
(not supplied)
Video cable
(not supplied)
To video input
jack
Remote control
Battery installation Q
Use 1 “AA” size battery (UM/SUM-3, R6, HP-7 or
similar). Battery is not included.
Open the battery cover.
1
Insert the battery according to the direction indicated 2
in the battery compartment.
When inserting or removing the battery, push it toward
the battery terminal.
Close the battery cover.3
Plug in with the lever side
facing to the top.
AM loop antenna
Caution:
Remove the battery if the unit will not be used for a O
long period of time. This will prevent potential damage
due to battery leakage.
Do not use rechargeable batteries (nickel-cadmium O
battery, etc.).
Installing the battery incorrectly may cause the unit to O
malfunction.
Batteries (battery pack or batteries installed) shall not O
be exposed to excessive heat such as sunshine, fi re
or the like.
Notes concerning use:
Replace the battery if the operating distance is reduced O
or if the operation becomes erratic.
Periodically clean the transmitter on the remote control O
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may O
interfere with operation. Change the lighting or the
direction of the unit.
Keep the remote control away from moisture, heat, O
shock, and vibrations.
CD-DHS1050P_US_EN.indd 4CD-DHS1050P_US_EN.indd 4 2/10/2011 3:32:22 PM2/10/2011 3:32:22 PM