Sharp DHS1050P Stereo System User Manual


 
E-15
Specifi cations
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specifi cation changes for product
improvement without prior notice. The performance specifi cation
fi gures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
General Q
Power source
AC 120 V ~ 60 Hz
Power consumption
P W
Dimensions
Width: 10 - 1/4" (260 mm)
Height: 13 - 1/2" (344 mm)
Depth: 13 - 1/5" (345 mm)
Weight
P
Amplifi er Q
Output power
RMS: Total 240 W (120 W per
channel into 6 ohms at
1 kHz, 10% Total harmonic
distortion.)
FTC: 85 W minimum RMS per
channel into 6 ohms from
200 Hz to 20 kHz, 10%
Total harmonic distortion.
Output terminals
Front Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output : 1 Vp-p
Input terminals
Audio In (audio signal):
500 mV/47 k ohms
Tuner Q
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,710 kHz
CD player Q
Type
5-disc multi-play compact disc
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
Cassette deck Q
Frequency response
50 - 14,000 Hz (normal tape)
Signal/noise ratio
50 dB (playback)
Wow and fl utter
0.35% (WRMS)
Tape speed
4.76 cm/sec. (1 - 7/8 ips)
Heads
Playback
USB Q
USB host interface
Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage Class.
Support Bulk only and CBI
protocol.
Support fi le
MPEG 1 Layer 3
WMA (Non DRM)
Bitrate support
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other
Maximum total number of MP3/
WMA fi les is 65025.
Maximum total number of folders is
999 INCLUSIVE of root directory.
The ID3TAG information supported
are TITLE, ARTIST and ALBUM
only.
Supports ID3TAG version 1 and
version 2.
File system support
Support USB devices with
Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
2 kbyte block length for sector.
Speaker Q
Front Speaker
Type
2-way type speaker system
2" (5 cm ) tweeter
5 - 1/8" (13 cm) woofer
Maximum input power
200 W
Rated input power
100 W
Impedance
6 ohms
Dimensions
Width: 8 - 11/16" (220 mm)
Height: 13 - 1/16" (332 mm)
Depth: 8 - 3/4" (222 mm)
Weight
6.8 lbs. (3.1 kg) / each
Subwoofer
Type
Subwoofer system
6 - 5/16" (16 cm) woofer
Maximum input power
300 W
Rated input power
150 W
Impedance
4 ohms
Dimensions
Width: 9 - 1/16" (230 mm)
Height: 13 - 1/16" (332 mm)
Depth: 12 - 11/16" (322.5 mm)
Weight
10.1 lbs. (4.6 kg)
CD-DHS1050P_US_EN.indd 15CD-DHS1050P_US_EN.indd 15 2/10/2011 3:32:24 PM2/10/2011 3:32:24 PM