Sharp CP-G10000S Stereo System User Manual


 
34
CD-G10000
CP-G10000S
Tape Recording
Recording on a cassette tape (continued)
Recording from a CD or MP3 disc
You can record the desired disc using the DIRECT PLAY button.
To stop recording:
Press the button.
The disc and tape will stop.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the DIRECT PLAY button to start
recording.
z
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
z Playback of the disc will start approximately 7 seconds after
the tape starts.