Sharp CP-G10000S Stereo System User Manual


 
32
CD-G10000
CP-G10000S
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2)
Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
z TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
z / button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
Before playback:
z For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
z
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
z Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing the
area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing toward you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
5
Press the / button to
start playback.
Tape play indicator
TAPE 1 TAPE 2