Filter
Top Products
Cleaning the bodypack transmitter
25
Exiting the operating menu – “EXIT”
Via the “EXIT” menu, you can exit the operating menu and return to the standard display.
When in the operating menu, briefly pressing the ON/OFF button µ will cancel your entry
(ESC function) and return you to the standard display without saving any changes.
Cleaning the bodypack transmitter
̈ Use a cloth to clean the bodypack transmitter from time to time.
̈ Do not use any solvents or cleansing agents.
Recommendations and tips
Tips for optimum reception
• Transmission range depends to a large extent on location and on the selected output power.
There should be a “free line of sight” between transmitting and receiving antennas.
• To avoid overloading the receiver, observe a minimum distance of 5 m between transmitting
and receiving antennas.
Tips for multi-channel operation
• When operating a multi-channel system, make sure to only use intermodulation-free
frequencies.
CAUTION
Liquids can damage the electronics of the bodypack transmitter!
Liquids entering the housing of the device can cause a short-circuit and damage
the electronics.
̈ Keep all liquids away from the bodypack transmitter.