Filter
Top Products
Using the bodypack transmitter
11
Doing a frequency check
The transmitter has a frequency check mode that prevents the transmitter transmitting on an
unwanted frequency after switch-on.
To change the transmission frequency, proceed as follows:
̈ Release the ON/OFF button µ.
̈ Within five seconds change to the “CHAN” or “TUNE” menu item.
̈ Change the transmission frequency (see “Adjustment tips for the operating menu” on page 20).
The automatic lock mode (autolock function)
The transmitter has an autolock function (automatic lock mode) that can be activated or
deactivated via the “LOCK” menu (
see page 24). When the autolock function is activated, the
lock mode is automatically activated 10 seconds after pressing the last button.
̈ When switching on the transmitter, keep the ON/OFF
button µ
pressed.
The RF signal is deactivated. The current frequency is
displayed on the LC display panel ¿.
If the displayed frequency is the correct one,
̈ Release the ON/OFF button µ.
After five seconds, “RF” ቤ appears on the LC display
panel and the RF signal is activated.
Prior to this, the lock mode icon ብ
flashes several times on
the LC display panel ¿, indicating that the lock mode is
being activated.
The autolock function can be deactivated permanently (see page 24) or temporarily (see
page 12).
¿
µ
¾
MHz
RF
ቤ
MHz
RF
4