Filter
Top Products
8
Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack
(see “Accessories” on page 33).
̈ Open the battery compartment by pushing the two catches ¸ in the
direction of the arrows and open the cover µ.
̈ Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
̈ Close the battery compartment.
The battery compartment cover µ locks into place with an audible
click.
Charging the accupack
To charge the bodypack transmitter with the BA 2015 accupack (see
“Accessories” on page 33) installed:
̈ Insert the bodypack transmitter into the L 2015 charger (see “Accesso-
ries” on page 33).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.
²
²
µ
µ
¸