Filter
Top Products
14
Using the bodypack transmitter
The current state of the muting function or the RF signal is displayed on
the display panel of the bodypack transmitter.
An additional display of the muting function appears on the
receiver’s display panel when
• the pilot tone function is activated on both bodypack trans-
mitter and receiver
and, in addition,
• this display has been activated via the “Warnings” menu item
on the receiver (see the instruction manual of the receiver).
Audio signal is muted
Transmitter’s display panel: “MUTE” ቨ is displayed
Receiver’s display panel:
“TX Mute” is displayed
*
* only when activated on the receiver (see previous section)
Audio signal is activated (muting is deactivated)
Transmitter’s display panel: “MUTE” ቨ is not displayed
Receiver’s display panel: “TX Mute” is not displayed
RF signal is deactivated
Transmitter’s display panel: Transmission icon ብ is not
displayed, “MUTE” ቨ is displayed
Receiver’s display panel:
“RF Mute” is displayed
*
* only when activated on the receiver (see previous section)
RF signal is activated
Transmitter’s display panel: Transmission icon ብ is displayed
Receiver’s display panel: “RF Mute” is not displayed
MHz
543.200
**2000**
MUTE
P
AF
ብ
ቨ