Filter
Top Products
12
Using the bodypack transmitter
To activate the RF signal:
To switch the bodypack transmitter off:
̈ If necessary, deactivate the lock mode (see next chapter).
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto
Lock” menu item (see page 23). If the lock mode is activated, you have to
temporarily deactivate it in order to be able to operate the bodypack
transmitter:
̈ Press the SET button.
The transmission frequency is displayed but the bodypack
transmitter does not transmit an RF signal. The transmission
icon ብ is not displayed. When the pilot tone function is
activated on both bodypack transmitter and receiver,
“RF Mute” appears on the receiver’s display panel.
Use this function to save battery power or to prepare a bodypack
transmitter for use during live operation without causing inter-
ference to existing transmission links.
̈ Press the ON/OFF button.
“RF Mute Off” appears on the display panel.
̈ Press the SET button.
The transmission icon ብ is displayed again.
̈ Keep the ON/OFF button Ƹ pressed until “OFF” appears on
the display panel. The red ON LED ¿ goes off and the display
panel turns off.
When in the operating menu, pressing the ON/OFF button Ƹ will
cancel your entry (ESC function) and return you to the current
standard display.
̈ Press the SET button or the ON/OFF button.
“Locked” appears on the display panel.
̈ Press the rocker button.
“Unlock?” appears on the display panel.
SET
MHz
543.200
**2000**
MUTE
P
AF
ብ
ON/OFF
SET
ON/OFF
SET
ON/OFF