Filter
Top Products
20
̈Set the volume control ´ on the receiver to a medium value (position 3–4).
̈Slowly turn control ¶ (“TUNE”) on the stethoset receiver until you can hear the audio signal
loud and clear. The receiver’s AFC (Automatic Frequency Control) circuitry stabilises your
adjustment.
Transmitter and receiver are now operating on the same frequency.
Simultaneous operation of several systems
Your neighbour also likes listening with radio headphones? No problem! With switch µ, you
simply select a different transmission channel on each transmitter. Then set the stethoset
receivers to the respective frequencies (with control ¶, as described above). Observe a mini-
mum distance of 2 m between two transmitters.
Due to the required approval two channels are selectable:
Positions 1 or 3 = channel 1
Position 2 = channel 2
RS 2400_512759_0106_Sp6.book Seite 20 Mittwoch, 15. Februar 2006 8:34 08