Filter
Top Products
19
Optimum modulation level of the transmitter
̈First, set the volume of your TV set to a medium value.
̈ The TR 2400 transmitters is fitted with an automatic modulation control which prevents
overmodulation of the transmitter. The LED
·
at the front of the transmitter indicates
optimum modulation. Now adjust the volume on your TV set such that the LED
·
blinks in
time with the speech, this indicates the correct transmission level.
Putting the receiver into operation
Charge the accupack for 24 hours before you use it for the first time!
̈Take your stethoset receiver out of the charging compartment ³ on the transmitter.
̈Have you charged the accupack separately from the stethoset
receiver? Then insert the accupack into compartment ² in the
receiver.
Switching on the receiver
Use control ´ to switch on the receiver and adjust the volume.
Adjusting the receiver channel
Transmitter and receiver have to operate on the same frequency:
̈Put the transmitter and the receiver into operation as described
above. Switch on the TV set! If possible, switch off its loud-
speakers.
̈Use switch µ on the transmitter to select a transmission
channel.
RS 2400_512759_0106_Sp6.book Seite 19 Mittwoch, 15. Februar 2006 8:34 08