Filter
Top Products
17
Where to place the transmitter
Choose a suitable place near your TV set.
Attention!
Some furniture surfaces have been treated with varnish, polish or synthetics which might
cause stains when they come into contact with other synthetics. Despite a thorough testing of
the synthetics used by us, we cannot rule out the possibility of discolouration, since we don’t
know your furniture. You should therefore always place the transmitter on a non-slip pad.
Putting the transmitter into operation
̈Use the supplied cable to connect socket º on the transmitter
to the headphone socket of your sound source. The cable is
fitted with a 3.5 mm jack plug suitable for most headphone
sockets. For connection to 1/4" (6.3 mm) headphone sockets,
use the supplied adaptor.
̈Connect the plug-in mains unit to socket ¾ on the transmitter
and plug the mains unit into a wall socket.
Antenna
The wire antenna is an integral part of the transmitter. For best
transmission the antenna should be vertical. You can therefore
̈leave the wire antenna dangling in a vertical position down
behind the transmitter or
̈
(the better option) slide the supplied plastic tube over the
antenna and snap it into the clamp at the back of the transmitter.
Make sure that there are no metal objects such as shelf bars or
lamp stands in parallel with the antenna. Do not place the trans-
mitter on your TV set as it might interfere with the transmitter.
Test where exactly in the room the transmitter works best.
RS 2400_512759_0106_Sp6.book Seite 17 Mittwoch, 15. Februar 2006 8:34 08