Filter
Top Products
21
Switching NoiseGard on/off
̈ Set the NoiseGard ON/OFF switch Ƹ to the desired position: “ON” or “OFF”.
With the NoiseGard active noise compensation switched off, the headset can be used as
a conventional headset.
Attaching the cable clip
The headphone cable can be fixed by means of the cable clip.
̈ Guide the headphone cable through the metal cable clip as shown.
̈ Attach the cable clip to your clothing.
̈ Loop the cable through the clip so that the headphone cable doesn‘t hinder or distract
you.
ƹ
Ƹ
ON: NoiseGard is switched on. The LED ƹ lights up, indicating the battery status
(see page 12) or power supply via the on-board DC power supply system.
OFF: NoiseGard is switched off. The LED ƹ goes off.