Sennheiser HMEC 460 Headphones User Manual


 
14
Note:
The latest information on cell phone compatibility can be downloaded from the
HMEC 460 product page at www.sennheiser.com.
̈ Connect the audio cable to the 2.5 mm jack socket µ on the operating control and to
the corresponding 2.5 mm jack socket on your mobile telephone.
You can adjust the volume of the mobile telephone via the headset’s operating
control. However, the functions of the mobile telephone cannot be controlled via the
headset’s operating control.
̈ Switch NoiseGard on (see page 21).
Audio from the mobile telephone and from the intercom are heard simultaneously
through the headset.
̈ Operate your mobile telephone as usual and observe the manufacturers instructions.
Danger of accident due to reduced attention!
Making telephone calls or operating the mobile telephone limits your
attention and may cause accidents.
̈ During flight operation, do not use the headset for telephone calls!
DANGER!