Filter
Top Products
19
Using the headset
Switching between mono and stereo mode
The operating control is fitted with a mono/stereo switch, which allows you to switch
between mono and stereo mode to suit the aircraft radio / audio panel / intercom
installation.
If the audio panel, intercom system or radio installation in your aircraft is mono:
̈ Set the mono/stereo switch ¹ on the operating control to position “
k
”(mono).
The RT and or intercom will be heard in both ears.
If the audio panel, intercom system or radio installation in your aircraft is stereo, for
example if there is a music player such as a CD player installed in the panel:
̈ Set the mono/stereo switch ¹ on the operating control to position “
kk
”(stereo).
The left and right channels from the audio panel will be fed to the corresponding sides
of the headset.
Notes:
– If you set the mono/stereo switch to “
kk
” (stereo) and you find that you only hear
RT or intercom in one side of the headset then you should set the mono/stereo
switch to “
k
” (mono).
¹