Open as PDF
Using the RS 180
Listening with several headphones simultaneously
By default, the transmitter is set to single-user operation. In order to be
able to listen to your sound source with several headphones
simultaneously, you have to set your transmitter to multi-user operation.
The settings for the left/right volume adjustment is applied to the
additional headphones. The volume of the each pair of headphones can be
̈ Make sure that all headphones are paired to the transmitter (see
̈ Switch all headphones on (see page 21).
̈ Then switch the transmitter on (see page 19).
̈ Briefly press the multi-function button ቤ of the transmitter.
The multi-function button ቤ of the transmitter and the multi-
function LEDs µ of the headphones flash green. You can now listen to
your sound source with several headphones simultaneously.
When pressing the transmitter’s multi-function button ቤ in
multi-user operation, the transmitter switches to single-user
operation. You can still listen to your sound source with the last
headphones paired, the other headphones are disconnected from