Open as PDF
Using the RS 180
Associating the headphones to the transmitter
The headphones and the transmitter are already associated upon delivery.
You only have to associate the headphones to the transmitter
• if you want to use another pair of Kleer compatible headphones or
• if the transmission between the headphones and the transmitter is
disturbed by interferences in the vicinity.
If you want to use several headphones, refer to the chapter “Associating
several headphones to the transmitter” on page 27.
Associating the HDR 180 headphones to the transmitter
When associating the headphones to the transmitter, the distance
between the transmitter and the headphones should not exceed 1 m.
̈ Make sure that the transmitter and the headphones are in standby
mode (see page 20 and 21).
The RS 180 system features the digital wireless audio transmission
technology from Kleer. You can also associate other Kleer
compatible headphones (e.g. the Sennheiser MX W1) to the
transmitter. For more information, refer to the chapter “Associating
other Kleer compatible headphones to the transmitter” on page 27
or to the instruction manual of the corresponding product.