Filter
Top Products
19
5.) Press the MEMORY button. Continue entering tracks in this way until all the
desired tracks are stored (up to 20 tracks).
NOTES:
• If the PLAY/PAUSE button is pressed before the MEMORY button is
pressed to store a track, the track will not be programmed, and the disc will start
playing from the first selected track.
• Any track can be programmed to play more than once.
• Repeatedly pressing the MEMORY button will enable you to check the program
if required.
LISTENING TO PROGRAMMED TRACKS
1.) Enter all tracks you want to program into memory following the procedures on
page 18.
2.) Press the PLAY/PAUSE button. Disc play will start at the beginning of the
first programmed track.
“TRACK MEMORY” indicator appears on the display.
TO CLEAR THE PROGRAM MEMORY
• Press MEMORY button to enter programming mode, then press the STOP
button.
• The program memory will also be cleared if the disc compartment is opened,
if the function is changed, or if the power is turned ‘Off’.
1 3
78
9
SMV122_ib_060402.p65 4/6/2002, 17:4219