Scotts SMV122 CD Player User Manual


 
14
CAUTION
Do not put anything except a compact disc into the compartment.
Foreign objects can damage the mechanism.
Keep the disc compartment closed when not in use to prevent dirt and dust from
entering the mechanism.
Never place more than one disc into the disc compartment at any time.
If the disc is correctly loaded, the total number of tracks on the disc will be
displayed.
NOTES:
After the disc compartment is fully closed, the disc information may not appear on
the display. This means that the disc is improperly loaded (most likely it is upside
down). To check, open the disc compartment again and reload the disc.
DISC PLAY
1.) Insert a CD as described in the previous section and close the disc compartment.
2.) The display will then show the total number of tracks and total play time.
3.) Press the PLAY/PAUSE button. Disc play will
begin from the start of the first track of the disc.
4.) As each track on the CD disc is played, the corresponding track number will
flash in the Calendar display. The > indicator will appear if the disc in the player
contains more than 10 tracks.
5.) A particular track can be selected using either of the CD Skip / buttons.
If this is done before pressing the PLAY/PAUSE button, disc play will start
with the selected track when the PLAY/PAUSE button is pressed.
6.) At the end of the disc, the unit will switch to stop mode.
1234
5678
9 10>
SMV122_ib_060402.p65 4/6/2002, 17:4214