Scotts SMV122 CD Player User Manual


 
18
4.) The selected track will then begin playing through to its end. At which
point it will automatically return to the beginning of that track. This will
continue until the STOP button is pressed.
5.) If the REPEAT / MEMORY UP button is pressed once more, the REPEAT
indicator will disappear and, repeat play will end. Normal disc play will resume
from that point.
6.) When the last track has finished playing, the CD player will then Stop.
PROGRAMMED DISC PLAY
It is possible to program the tracks you wish to play in a sequence of your choice.
It is not possible to enter program a disc during playback. Press the STOP
button first, then follow the instructions below.
It is easier to use the remote control for the following settings, however you may
also use the controls on the main unit if desired.
ENTERING A PROGRAM
1.) Press the MEMORY button. TRACK MEMORY flashes and P-01 will be
displayed on the display.
2.) Select the first desired track using the and Skip buttons.
3.) Press the MEMORY button. The first program selection is now stored in the
program memory. The display will now show P-02.
4.) Select the next desired track using the Forward and Reverse Skip
Buttons.
STOP
MEMORY
MEMORY
SMV122_ib_060402.p65 4/6/2002, 17:4218