Sangean Electronics WFT-1 Radio User Manual


 
17
5. Set the alarm mode (Buzzer, Internet radio, FM, last listed,
or Preset)
a. Rotate the TUNING knob to let the “Mode” is pointed.
Then press the TUNING knob. Then rotate the TUNING knob to
select the “Buzzer”, ”Internet radio”, ”or FM”. Then press the
TUNING knob. Or you can also
b. Rotate the TUNING knob to let the “Last listed” is pointed,
and press the TUNING knob. Then select “Last listed or Preset
(if Preset is programmed). And then press the TUNING knob.
6. Set the alarm Volume:
a. Rotate the TUNING knob to let the “Volume” is pointed,
and press the TUNING knob.
b. Rotate the TUNING knob to adjust the alarm volume.
Then press the TUNING knob.
7. Save the alarm: The settings will not be saved and activated until the
‘Save’ menu item has been selected. If ‘Save’ is not selected and the
Alarm Setting menu is exited, then any updated values will be lost.
Rotate the TUNING knob to let the “Save” is pointed, then press the
TUNING knob. Then the alarm is saved and activated.
Turn off the alarm
1. By rotating and pressing the TUNING knob to the direction of
Main menu > System setup > Time setup >Alarms.
2. Rotate the TUNING knob to let which alarm you would like to turn off.
Then press the TUNING knob.
3. Rotate the TUNING knob to let the “On ” is pointed, then press the
TUNING knob.
4. Then “OFF” will be shown.
5. Rotate the TUNING knob to let the “Save” is pointed, then press the
TUNING knob. Then the alarm is off.