Filter
Top Products
14
GB
Presetting stations - DAB and FM
There are 5 memory presets on the panel for each of the 2 wavebands.
However, There are 10 memory presets on the remote control for each
of the 2 wavebands.
1. Press and release the On / StandBy button switch on the radio.
2. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display
shows e.g. “Preset 1 stored”. The station will be stored under
the chosen preset button. Repeat this procedure for the
remaining presets.
4. Stations stored in preset memories may be overwritten by following
the above procedure.
Recalling a preset station - DAB and FM
1. Press and release the On / StandBy button to switch on the radio.
2. Select the required waveband by pressing the Band button.
3. Momentarily press and release the required Preset button, your radio
will tune to the station stored in preset memory.