Filter
Top Products
43
44
A
Adding a HUB
An M7 and a HUB may not pair successfullly if the M7 and HUB are too far apart or are
on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater
mode. The additional HUB amplifies the signal and lets you pair the M7 to the closest
HUB.
1
Set the HUB that is connected to the wireless
router to Pairing mode by pressing its
SPK ADD
button for 1 seco
nd.
2
Plug in the new HUB you are using as an
extender, and then press its
SPK ADD
button for
10 seconds.
3
The newly added HUB s LED indicators turn off
and on, and it switches to Repeater mode.
4
Once the connection between the two HUBs
has been established, the added HUB
s ( )
indicator stops blinking.
NOTES
9
If your smart device is not connected to the wireless
router with a Wi-Fi connection, the M7 will not appear
on the Samsung Multiroom app.
9
Place the HUB that is in Repeater mode in an appropriate location between the M7 and
the HUB that is connected to the wireless router.
9
You can set only one HUB to Repeater mode.
A
Relocating the M7
When relocating your M7, refer to the below table.
Wireless router
HUB
If you want to connect your M7 to the
current wireless router.
If you want to connect your M7 to a
different wireless router.
Without a HUB
Turn off the M7, relocate it and then turn
it on.
Turn off the M7, relocate it, then establish
the new connection as described in the
installation instructions on pages 23
through 33.
Press here
With a HUB
Connect a LAN cable between the HUB
and the new wireless router, turn on the
HUB, and then turn on the M7.
M7
HUB
Used as a
extender