Filter
Top Products
41
44
❚
Adding another M7 and Hub to a single M7 in use
`
When the M7 in use is connected to the router with a LAN cable
1
Disconnect the LAN cable from the M7 in use.
2
Connect the HUB to the wireless router with the LAN cable, and then plug in
the HUB's power cable.
3
Plug in the power cable of the new M7. The new M7's blue LED pairing
indicator starts to flash. Wait until the pairing indicator on the M7 s
tops
flashing. When the indicator stops flashing, pairing is complete. The M7 may
also beep.
4
Turn off the old M7 by disconnecting the power cable. Then. connect it again.
Press the
SPK ADD
button on the back of the M7. The M7's blue LED pairing
indicator starts to flash. Wait until the pairing indicator on the M7 stops
flashing. When the indicator stops flashing, pairing is complete. The M7 may
also beep.
5
On your smart device, select the Samsung Multiroom app. Setup starts.