Filter
Top Products
23
44
A
Connecting with a HUB (Not Included)
•
If the M7 fails to connect to your network or its network connection operates
abnormally, place the M7 closer to the HUB or your router and try again.
•
The M7 is a wireless network device. Its communications with your network
may be disrupted because of the distance between it and other devices on the
network, obstructions, or interference from other wireless devices.
❚
Connecting the M7(s) to Your Network with a HUB (Not Included)
1
Connect a LAN cable to the router and the
ETHERNET SWITCH
on the back of
the HUB.
NOTE
9
You can connect the LAN cable to any
ETHERNET SWITCH
Port on the HUB.
2
Attach the HUB s power cord to the power port on the rear of the HUB, and
then plug the power cord into an electrical outlet.
3
The power ( ) and the HUB ( ) indicators on the HUB s front turn on.
When the pairing indicator ( ) begins to flash, plug the M7(s) into an outlet.
The pairing indicator on the M7 starts to flash.
If the HUB s pairing indicator does not flash, press the
SPK ADD
button on the
rear of the HUB.
NOTE
9
If you are adding multiple M7s, connect all the M7 s to electrical outlets. If you are not
connecting all the M7s, refer to pages 40~42.
Press here
4
Wait until the pairing indicator on the M7 stops flashing. If the M7's LED
indicator turns solid blue, pairing is complete. The M7 may also beep.
POWER
VOLUME
Wireless Router
LAN Plug In
HUB
Plug In
Connections