Filter
Top Products
18
44
A
Connecting the Cover-Stand
1
Before attaching the Cover-Stand,
remove the rear cover.
Insert the power cable through the
Cover-Stand hole into the M7 power
port.
2
The inside of the Cover-Stand has two
sides. One side (A) has four tabs - two large
tabs and two small tabs. The other side (B)
has two large tabs only. Insert the two large
tabs on side A into the two slots in the area
marked A in th
e diagram.
3
Turn the M7 so the side marked B in the
diagram is facing you. With the thumbs of
both hands, press side B of the Cover-Stand
so that the tabs on side B snap into the
slots in the area marked B in the diagram.
You may need to press side B of the Cover-
Stand with some force.
4
The M7 can now be installed vertically.
Caution
9
Do not place the M7 on an unstable surface.
VOLUME
VOLUME
A
VOLUME
B
➡