Filter
Top Products
Updating Helix Firmware
Updating Helix Firmware
65
ENG
Using the Update
Tool
If you don’t use XM+Napster, you can
update the Helix firmware manually.
1. Insert the XM+Napster CD in your PC’s
CD-ROM or DVD drive.The XM+Napster
software should start automatically.
2. Click on Browse CD.
3. Click on Utils, then click on
XMFirmwareUpdateClient.
4. Follow the instructions on the PC
screen.
You can run this firmware update tool at
any time. If the firmware needs to be
updated, the tool will install it automati-
cally. If the firmware is already up-to-date,
nothing happens.
Using the Web
Point your Web browser to http://fwupdt.xmradio.com and follow directions.