Filter
Top Products
ngExternalComponents
Example: Digital signal components such as a Settop Box or CD Recorder.
f
Example: Analog signal components such as a VCR or TV.
@
1 Connect Video Out on the DVD player to Video In on the TV.
2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
3 Press AUX on the remote control to select 'DIGITAL IN'.
• Eachtimethebattenis pressed,the selectionchangesasfollows:DIGITAL IN _ AUX ] _ AUX2.
• Youcanalso usetheFUNCTIONbattenonthe mainunit.
The modeswitchesas folIows:DVD/CD _ DIGITAL IN , AUX] _ AUX2 _ FM , AM.
17
1
2
3
4
Video Cable
AudioCable 1
Iftheexternatanalog /
componenthasonlyone/
AudioOut,connect
eitherleftorright.
Connect Video Out on the DVD player to Video
In on the TV.
Connect Video In on the DVD player to Video
Out on the external analog component.
Connect Audio In on the DVD player to Audio Out
on the external analog component.
• Be sure to match connector colors.
Press AUX on the remote control to select AUX 1 or
AUX 2.
• Each time the button is pressed, the selection changes as
follows: DIGITAL IN _AUX 1 _ AUX2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD _ DIGITAL IN
AUXI _ AUX2 _FM _ AM.
• if you have connected an external digital
component and also anAnalog
component to Video In (1,2) at the same
time, there will be video from AUX 1even
when you select DIGITAL IN.
• if you have connected Audio in (L, R) to
1,connect Video In to 1 aswell, and if
you have connected Audio In(L, R)to 2,
connect Video In to 2 also.
• When you select Aux 1or 2, you are
selecting Video 1or 2 inputsrespectively.
18